car starter

 

Your vehicle’s starter includes one of its most crucial parts. It will start the engine, and this process, consequently, charges the vehicle’s battery. The starter is a powerful, small electrical motor. As the starter dies, the car won’t start. Some simple observations will be able to inform you why the car isn’t starting, and occasionally it may have nothing to do with the car starter.

1. Check the car’s lights and dashboard. If they’re weak or aren’t on, the battery may be in need of a charge or dead. It’ll provide your starter the power needed to start your car. Check the handbook for references to the condition.

2. Try to crank the engine as the headlights are on; if the headlights go out, there’s potentially a poor electrical connection. Clean your battery connections. Eliminate corrosion and additional oxides around the negative and positive battery connectors.

3. Check your lights while trying to crank your engine. If your lights decline in intensity, a low battery potentially is the problem. Charge your battery and then start again.

4. Listen to sounds while trying to crank your engine. If your lights shine, yet nothing happens, assess the parking systems and ignition system. Each might have a switch-associated failure.

5. Listen for the sounds while trying to crank your engine. A noise that is high pitched from your starter means it isn’t correctly aligned. Check the starter’s position for correct placement. It’s a particularly bad condition, as incorrect positioning may produce broken teeth upon the starter’s flywheel and additional damage.

6. Listen to your car starter while trying to crank your engine. Clicking while starting will mean the solenoid circuit failed. Replace your solenoid circuit.

7. Pull out the starter from the car using a wrench. Check to see that no open circuits are inside your starter. Check your car starter using an ohmmeter to check to see if there are any open circuits. Open circuits mean the starter possesses a total electric failure due to wiring. If your starter failed electrically within this manner, you should replace it. If you have to jack the car up, observe every recommended safety precaution.

8. Assess the flywheel and brushes of your starter for defects. If those parts are defective, replace them.

Other Considerations

Be certain to have a live battery prior to diagnosing starter issues.

Do not crank without stopping, as it may overheat your starter.

Shut the door prior to starting the vehicle.

If you have to jack the car up to remove the car starter, take precautions in order to prevent the car from rolling.

Follow us on Twitter